养生作用对硫沥青性能影响分析

硫磺部分替代传统石油沥青用于道路工程建设可减少石油沥青用量,降低施工能源消耗,促进工业废渣中硫磺的回收利用,具有较高的经济和环保价值。为探究硫磺掺量（质量分数）及养生作用对硫沥青（SEA）性能的影响,采用差示扫描量热仪（DSC）验证硫沥青中硫磺的重结晶现象,对养生前后硫沥青的基本物理性能和黏度进行分析,并采用动态剪切流变仪（DSR）和弯曲梁流变仪（BBR）对养生前后硫沥青的流变特性和疲劳性能进行评价,最后借助荧光显微镜（FM）观察养生前、后硫磺在沥青中的微观分布特性。研究结果表明：养生后高硫磺掺量的硫沥青DSC曲线出现吸热峰,硫沥青（特别是高硫磺掺量下）的劲度有所增加,因此对硫沥青进行养生使其性能稳定后再进行相关性能评价更具现实意义;硫磺掺量较低（≤ 10%）时,硫磺主要以溶解硫的形式存在于沥青中起到软化沥青的作用,因此沥青的低温变形能力有所改善,但其高温抗变形能力有所降低;当硫磺掺量较高（≥ 35%）时,硫磺主要以重结晶的形式悬浮在沥青中使沥青变硬,在增加沥青高温抗变形能力的同时也牺牲了其低温抗裂能力;硫磺掺量较低时,硫沥青黏度随着硫磺掺量的增加而降低;硫磺掺量较高时,硫沥青90℃和105℃黏度随着硫磺掺量的增加而增加,但硫沥青120℃和135℃黏度相差不大,同时硫磺加入最高可降低沥青的施工温度达20℃;线性振幅扫描（LAS）试验结果表明,养生后的硫沥青疲劳寿命比基质沥青长,其中35%硫沥青疲劳性能最佳;硫磺掺量进一步增加,硫沥青疲劳寿命缩短至与基质沥青相近;FM分析表明,硫磺掺量不高于5%时,硫磺全部溶解于沥青中,且养生后硫磺未重结晶,相应硫沥青无荧光性;硫磺掺量高于5%时,硫磺在沥青中分布均匀,养生后10%硫沥青中硫晶斑尺寸和面积显著增大,高硫磺掺量硫沥青中硫晶斑面积仅略有增加。     

Application of Sensitivity Methods to Analysis and Synthesis of Vehicle Dynamic Systems

The development and application of sensitivity methods for determining the effects of parameter changes on the response of vehicle dynamic systems is presented. The procedures shown can be used to enhance the analysis and synthesis processes of virtually any road or rail vehicle system regardless of its complexity. The parametric sensitivity of vehicle models in time domain, steady state models and vehicle models in frequency domain can be investigated using different types of sensitivity functions, both dimensional and dimensionless including first order standard, percentage, logarithmic, second order standard, and logarithmic and percentage sensitivity measures. These sensitivity functions and measures are determined as functions of partial derivatives of system variables taken with respect to system parameters. In the case of sensitivity functions in the frequency domain the variable values are computed as either the magnitude or phase angle of a complex element of the transfer function matrix. The methods presented enable to determine the influence of all system primary (constant) and secondary (non-constant) parameters on system primary and secondary variables. The primary variables are state variables or elements of the transfer function matrix and the secondary variables may be any functions of primary variables and system parameters. Typical secondary system parameters which can be examined include initial conditions, time variant coefficients, natural frequencies, loads, and typical secondary variables are forces, weight transfers, stability factors and energy components. The analysis of sensitivity results obtained for three vehicle handling models in both linear and nonlinear regimes of vehicle performance and utilizing various types of sensitivity functions is also presented.     

Aggregating mobile object trajectories: cumulative time geographic density estimation for GPS data

We present new approaches that expand upon the time geographic density estimation (TGDE) framework previously employed to estimate potential path trees. In the past, TGDE metrics have identified possible locations an individual moving object may have passed between, given known origin and destination points. This paper utilizes a new form of TGDE to investigate taxicab GPS traces over a specified time horizon with position ‘gaps’. To this end, we propose a new extension to the TGDE framework, TGDE-C, which is used to determine the cumulative TGDE values for a group of GPS traces, at a given location. These metrics are applied to multiple taxis and allow for time of day analysis. Additionally, we combine these new extensions with existing TGDE metrics that allow us to determine how accessible individual or groups of vehicles are to urban opportunities.     

Error quantification of a high-resolution coupled hydrodynamic-ecosystem coastal-ocean model: Part 2. Chlorophyll-a, nutrients and SPM

Marine systems models are becoming increasingly complex and sophisticated, but far too little attention has been paid to model errors and the extent to which model outputs actually relate to ecosystem processes. Here we describe the application of summary error statistics to a complex 3D model (POLCOMS-ERSEM) run for the period 1988–1989 in the southern North Sea utilising information from the North Sea Project, which collected a wealth of observational data. We demonstrate that to understand model data misfit and the mechanisms creating errors, we need to use a hierarchy of techniques, including simple correlations, model bias, model efficiency, binary discriminator analysis and the distribution of model errors to assess model errors spatially and temporally. We also demonstrate that a linear cost function is an inappropriate measure of misfit. This analysis indicates that the model has some skill for all variables analysed. A summary plot of model performance indicates that model performance deteriorates as we move through the ecosystem from the physics, to the nutrients and plankton.     

160 km/h高速货车转向架的研制

根据高速货车转向架的运用要求和运用条件,确定了160km/h高速货车转向架的主要技术参数;提出了整体焊接构架式有摇枕转向架的结构形式,介绍了其主体结构情况;结合转向架静强度和疲劳试验、线路动力学试验结果,得出了转向架设计是较为成功的结论。     

Logistical restructuring and road freight traffic growth

The forecasting of road freight traffic has relied heavily on the close correlation between GDP and road tonne-kilometers. It has not been rooted in an understanding of the causes of freight traffic growth. The research reported in this paper has investigated this process of traffic growth in two ways: first, by analysing official data on the production, consumption and movement of food and drink products, and second, by conducting a survey of the changing freight transport requirements of 88 large British-based manufacturers.The analysis of secondary data shows how, in the food and drink sector, the relationship between the real value of output and road vehicle-kms hinges on four key parameters: value density, handling factor, average length of haul and consignment size. An attempt is made to explain variations in these parameters.The survey of manufacturers suggests that the growth of lorry traffic is the net result of a complex interaction between factors operating at four levels of logistical management: strategic planning of logistical systems, choice of suppliers and distributors, scheduling of product flow and the management of transport resources. Changes in the frequency and scheduling of freight deliveries in response to tightening customer service requirements and just-in-time management appear to have become a more prevalent cause of freight traffic growth than the physical restructuring of logistical systems. Manufacturers anticipate that their road freight demand will broadly increase in line with sales and be largely unaffected by road transport cost increases at the levels currently proposed. The paper concludes by examining their likely reactions to a much sharper increase in the cost of road freight movement.     

美国的城市交通规划

介绍了今后几十年中将影响城市交通规划的一些重要趋势，讨论了今后交通规划者在十个领域可能面临的挑战。     

ECP制动在重载铁路上的运用

Wabtec缆接电空制动（ECP）系统正运用在Spoornet（南非）和CSX（美国）的运煤列车上，本文详细介绍了这2种列车上的ECP系统，并对它们的运用经验及最终效益进行了讨论。